Table of Contents
Advertisement
2.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.
3.
If a message has been left at your keyset by a keyset in Auto Answer, you must
manually cancel the message after it has been returned.
PROGRAMMED MESSAGES
When you will be away from your phone for any length of time, you can leave a
programmed station message. Display stations calling you will see this message
and be informed of your status or follow your instructions.
•
Dial 48 plus any of the message codes (01–20) listed on the back of this user
guide.
•
To cancel any of these messages you might have selected, dial 48 plus 00.
•
Press TRANSFER to exit and store your selection.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button.
You can have multiple programmed message buttons (PMSG) and each one can
have a different message code:
•
Press any programmed message (PMSG) button. The message is set and the
PGM MSG button indicator will be lit steady. Press the button again to turn off
the programmed message and the indicator will go blank.
•
Pressing another programmed message (PMSG) button will turn the previous
one off and set a different programmed message.
To assign absent messages via the LCD:
•
Select pre-programmed, or custom messages from the extended absences
(10 pre-programmed and 10 custom messages).
•
Scroll to or dial [7] and press ENTER.
•
Scroll UP/DOWN to the desired message.
•
Press ENTER, display confirms save.
•
To clear absent message, press MENU at message option and scroll down to
clear, press ENTER, display requires more input, select YES/NO, press ENTER,
display confirms cleared.
CONVENIENCE FEATURES
DO NOT DISTURB
Use this feature when you want to block calls to your keyset.
•
While on-hook, press the DND button or dial 401. The DND button indicator
will be lit steady to remind you of this mode.
•
To cancel DND, press the DND button again or dial 400.The DND button indi-
cator goes blank. You can make calls while in the DND mode.
NOTES:
1.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button.
2.
If you place your keyset in DND mode and you do not have a DND button,
your TSI button will flash to indicate DND status.
ONE TIME DND
If you are on a call and you do not wish to be interrupted while on that call, you
can press the DND button and place your station in Do Not Disturb. When you
hang up at the end of the call, DND will be automatically canceled and your key-
set will be able to receive new calls. This feature requires a DND button.
MUTE
You can mute the handset transmitter or the microphone during any conversa-
tion:
•
Press the MUTE button. The MUTE button indicator will be lit steady.
•
To resume speaking, press the MUTE button again. The MUTE button indica-
tor goes blank.
BACKGROUND MUSIC
When a music source is supplied, you may listen to music through the speaker in
your keyset:
•
While on-hook, press the HOLD button to hear music.
•
Press the HOLD button again to turn music off.
You can set the level of background music by using the VOLUME buttons while lis-
tening to the music. This does not affect the speakerphone level.
39
40
Advertisement
Table of Contents
