Section 2. Maintenance; Introduction; Maintenance Hints; Halogen Lamp Replacement - Henny Penny SCR-6 Technical Manual

2-1. INTRODUCTION

2-2. MAINTENANCE HINTS

2-3. HALOGEN LAMP
REPLACEMENT
Step 2
203

SECTION 2. MAINTENANCE

This section provides procedures for the checkout and replacement of
the various parts used within the rotisserie. Before replacing any parts,
refer to the Troubleshooting Section. It will aid you in determining the
cause of the malfunction.
1. You may want to use a multimeter to check the electric
components.
2. When the manual refers to the circuit being closed, the
multimeter should read zero unless otherwise noted.
3. When the manual refers to the circuit being open, the multimeter
will read infinity .
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
Light bulbs and surrounding surfaces may be hot.
Severe burns could result.
1. Push in and twist bulb counterclockwise to remove defective bulb.
2. Use the foam packing around new bulb, and push new bulb into
socket. Twist clockwise to lock into place.
When installing the new bulb, do not touch light bulb with
fingers. Wrap the foam packing around bulb to install the
bulb. Failure to follow these instructions could cause dam-
age to bulb.
3. Restore power to unit.
SCR-6/8
2-1