Mobile Network Settings; View Network Activation Information; View Data Usage - NETGEAR Sprint 6100D User Manual

Mobile Network Settings

View information about your mobile network activation, data usage, and settings.

View Network Activation Information

You can check whether network access is activated.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click About in the top right corner of the page.
5. Check the Activation Date in the WWAN Info section. This is the date that the gateway
was activated on the Sprint network.

View Data Usage

You can view an estimate of your data usage on your device's home and Data Usage screens,
and on the gateway's home page.
Note: The data usage shown is an estimate only and is not accurate for billing purposes.
Note: The session data counter resets automatically each time your device is powered off and
on, and when the mobile broadband network connection disconnects and reconnects (for
example, when going through a tunnel). The billing plan data counter resets automatically when
the next billing cycle starts.
To view an estimate of your data usage:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
The Data Usage Session section displays:
●
Amount of data used in the current session.
●
The length of time the connection has been active.
Mobile Network Settings 88