Enable Dmz; Configure Dmz - NETGEAR Sprint 6100D User Manual

Enable DMZ

Before you can use or configure DMZ, you must enable it.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router.
5. Next to DMZ Enabled, select ON.
6. Click Submit.

Configure DMZ

Specify which computer is to receive all unsolicited incoming connections.
Note: DMZ must currently be enabled. (See
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > Router.
5. In the DMZ Address, enter the IP address of the computer that you want exposed to
the Internet. (If you don't know how to find the IP address, see
Gateway Settings
Enable DMZ.)
Finding the IP Address.)
87