Introduction
NI-2000 Specifications
The front panel LEDs (FIG. 1) are grouped by control type and are labeled according to their
corresponding port (connector) numbers on the rear of the unit. The back of the unit contains three
RS-232/422/485, one Relay, one IR/Serial and one I/O connectors. In addition, this unit provides an ID
pushbutton, AXlink LED, and other related connectors. FIG. 2 shows the front and rear of the NI-2000.
FIG. 1
NI-2000 NetLinx Integrated Controller (front view)
Link/Active-Status-Output-Input
Front
Rear
Relays
(Port 4)
FIG. 2
NI-2000 front and rear panel components
2
RS-232/422/485 (Ports 1-3)
IR/Serial (Ports 5-8)
I/O (Port 9)
Program
port
RS-232/422/485 TX/RX LEDs (red/yellow)
Relay LEDs (red)
IR/Serial LEDs (red)
I/O LEDs
(yellow)
ICSNet (2)
ICSHub Out
Ethernet
DIP
switch
ID Pushbutton
NI-2000, NI-3000, NI-4000 Hardware Reference Guide
AXlink LED
(green)
AXlink
port
PWR