Ni-4000 Specifications - AMX NetLinx Integrated Controllers NXI-x000 Series Hardware Reference Manual

Introduction

NI-4000 Specifications

The front LEDs (FIG. 5) are grouped by control type, and are labeled according to their corresponding
port (connector) numbers on the rear of the unit. The back of the this unit contains RS-232/422/485,
Relay, IR/Serial and I/O connectors. In addition, this unit provides an ID pushbutton, AXlink LED,
NetLinx Card slots, and other related connectors. FIG. 6 shows the front and rear of the NI-4000.
FIG. 5 NI-4000 NetLinx Integrated Controller (front view)
Link/Active-Status-Output-Input
NetLinx
Card
slots
(1-4)
Front
Rear
Relays
(Port 8)
CardFrame DIP
FIG. 6
NI-4000 front and rear panel components
10
RS-232/422/485 (Ports 1-7)
I/O (Port 17)
Slot 1-4 connectors
switch
RS-232/422/485 TX/RX LEDs (red/yellow)
Relay LEDs (red)
IR/Serial LEDs (red)
I/O LEDs (yellow)
ICSNet (2)
ICSHub Out
Ethernet
IR/Serial (Ports 9-16)
DIP
switch
Program port
ID Pushbutton
NI-2000, NI-3000, NI-4000 Hardware Reference Guide
AXlink LED
(green)
AXlink
port
PWR