Table of Contents
Advertisement
Introduction
The AXP-PLV PosiTrack Pilot Video Panel Camera Controller (PosiPilot) is an integrated
controller for use with cameras and camera positioning devices (such as the AXB-PT15 PosiTrack
Camera Controllers). Refer to the AXB-PT15 PosiTrack Camera Controller instruction manual for
more information. The AXP-PLV connects to the camera-positioning device and Central Controller
via an AXlink connection. This connection provides control of the pan/tilt, camera, and lens. The
PosiPilot can be used in a stand-alone configuration with a Central Controller, compatible cameras,
and positioning systems, or as part of a larger AMX control system.
The PosiPilot combines traditional dual-axis proportional-speed joystick camera controls with an
integrated Color Active Mini-Touch Panel to give you graphic touch control and on-screen video
monitoring (with video input for NTSC/PAL).
Specifications
Specifications
Dimensions (HWD)
Weight
Power
Enclosure
Temperature Range
Power Consumption
Buttons
Video monitor
Video In
Compatibility
Connectors
FIG. 1 and FIG. 2 show the dimensions for the front and side of the AXP-PLV.
FIG. 1 AXP-PLV front panel dimensions
AXP-PLV PosiTrack Pilot Video Camera Controller
4.97" (including joysticks) x 17.67" x 8.39" (12.61 cm x 44.89 cm x 21.30 cm)
4.90 lb (2.20 kg)
825 mA
Plastic with matte blue finish and plastic rests
0º C (32º F) to 50º C (122º F)
1 A @12 VDC
12 pushbuttons, six on each side to select cameras and access camera menus
6-inch (152.40 mm) color active-matrix LCD screen
BNC female connector (NTSC/PAL)
NetLinx/Axcess Central Controllers
• 4-pin mini-XLR (female) cable (pre-assembled)
• BNC (female) Video In connector (NTSC/PAL)
Introduction
1
Advertisement
Table of Contents
