Hash Key; Star Key; Power Led - ADT Galaxy 8 User Manual

User Guide
ENTER KEY (ent)
User level 3 and above to enter codes, data or selections into the system.
User level 2 to set and unset the system.
User level 1 to set the system.
User level 0 to log PIN entries.
ESCAPE KEY (esc)
The esc key aborts the current option to return to the previous option level. Any option
modification made prior to the option being aborted is erased. Successive pressing of the esc
key returns the user to the start display (known as the BANNER).
The esc key also aborts the setting routine if pressed during the exit time.

HASH KEY (#)

The # key is used to display additional choices for certain options, e.g. ADVANCE/RETARD
the time in the TIME/DATE option.
This key is also used as the user duress key (by pressing twice following a valid code
entry).
T T T T T

STAR KEY (

The T key is used to provide additional features for certain options, e.g. printing the event log
or deleting entries.

POWER LED

The green power LED remains lit whenever the keypad is connected to a mains power supply.
A mains power failure is indicated by the LED flashing slowly. The LED flashes rapidly if the
battery voltage falls below the minimum threshold or if one of the fuses on the control panel
PCB blows.
BANNER
The banner is the display shown on the keypad, e.g. Galaxy 500 V1.15 (with the time and
date on the bottom line). This is shown at all times, unless the menu is being accessed or an
alarm or help message is on display. The banner can be changed by the engineer.
USER CODES
The user code is a unique four, five or six digit PIN (Personal Identification Number). The
PIN identifies the user to the Galaxy Alarm panel and allows operation of the system.
Technical Manuals Online! - http://www.tech-man.com
)
2 Galaxy 8/18/60/500/512