Groups; Summer - ADT Galaxy 8 User Manual

User Guide
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
3
CODES
3 = MAX Users
ent
201 USER ‚
A 1-------
ent
MAX Users
1 = Max No
>A
Max Users


2 = Groups

ent
Groups A 1_______
>A 1_______
>A
Groups B 1_______
>B 1_______
2+3
Groups B 1_______
>B 123_____

ent
Technical Manuals Online! - http://www.tech-man.com
24
GROUPS
This option assigns group access to the MAX user. The MAX user
must be assigned a group that is common to the MAX moduleto
permit the access control functions to operate. If the MAX user does
not have access to the group assigned to the module, the access
control functions are denied. The Modify Groups option is only
available when groups have been enabled by the engineer. The
system defaults to groups disabled.
On selecting the Modify Groups option, the groups currently allo-
cated to the user are displayed. All users default to group 1. Pressing
the group number toggles the group assigned to the user. Pressing 2
and 3 assigns groups 2 and 3 to the user. Pressing 1 (while group 1 is
already assigned) removes group 1 from the MAX user; press the ent
key to accept the programming and return to the previous menu level.
• GALAXY 500, 504 and 512
The Galaxy 500 has 16 groups, and the 504 and 512 have 32
groups. These are displayed on the keypad in blocks of eight
groups, labelled A, B, C and D. Use the A> or <B keys to move
between the group blocks. Press keys 1 – 8 to assign the groups in
each block to the user.
SUMMER (User Level 6)
On the first day of each year, the British Summer Time (BST) Start
date is set to the last Sunday in March and the End date is set to the
fourth Sunday in October.
The operation of the Summer option is as follows: At 01: 00 hours
on the Start date, the system clock advances to 02 : 00 hours; at 01 :
00 hours on the End date, the system clock goes back to 00 : 00
hours (midnight).
The Start and End dates can be reprogrammed by authorised user
codes. Press the A> key to modify the Start date or the <B key to
select the End date; the new date must be a valid four digit number
— in the day month format (dd/mm).
• GALAXY 512
The Summer option can only be modified by the engineer.
Galaxy 8/18/60/500/512