Modify Name; Time Zone - ADT Galaxy 8 User Manual

User Guide
PIN + ent
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
ent
CODES
1 = User Codes
ent
ð
001 USER
L3
ent
[ent] to Select
3 = Modify PIN
3
[ent] to Select

3 = Modify Name

ent
>A
001 NAME USER_
EFG HIJKLMNØö0 P
ent
[ent] to Select

4 = Time Zone

ent
[ent] to Select
0 = OFF
Use the A key
to step through
the four time
zone options.
ent
Technical Manuals Online! - http://www.tech-man.com
18
• QUICK MENU
All user codes default to the quick menu. This menu is made up
of a selection of ten options (0 – 9) from the menu options 11 –
68. The user code level controls access to the quick menu. Any
user can be upgraded from the quick menu to the full menu by
assigning a T to the user while the Modify Level option is
accessed. Therefore a user with a level T5 would have access to
the full menu from options 11 – 39. No code can access both
menus.
NOTE: The manager code defaults to the quick menu on the
Galaxy 8 and 18, but defaults to the full menu on the
Galaxy
MODIFY NAME
This allows a name to be assigned to the user (maximum six charac-
ters). Each of the user codes default to the name USER and the
manager defaults to MGR. The manager name cannot be changed.
On selecting the Modify Name option, a section of the alpha-
numeric that can be assigned to the user name is displayed on the
bottom line of the keypad; the cursor flashes on the letter L. Press T
to erase the letters of the default or previous name. When the previ-
ous name has been erased, use the A> or <B keys to move the cursor
to the first letter of the name and press the ent key. The selected
character appears on the top line, continue this process until the name
is completed. The # key toggles between upper and lower case
characters and the system library.
TIME ZONE (Galaxy 60, 500 & 512)
Managers can allocate time zones to user PINs when TIMERS have
been programmed by the engineer. Time zones are used to disable the
user PIN during the times (ON to OFF) programmed in TIMER A
and B.
When 4 = Time Zone displays press the ent key . Using the A> key
select the time zones option to be allocated to the PIN. The following
time zones options are available:
0=OFF
1=TIMER A
2=TIMER B
3=TIMER A+B
The times assigned to Timer A and Timer B can be viewed using
option 45 Timer Control. If a code that has been assigned to
Galaxy 8/18/60/500/512
60, 500 and 512.