Table of Contents
Advertisement
8. Upgrading Firmware Using IP Utility
You can upgrade the Firmware using the IP Utility software included in the software CD.
1.
Install and then start the IP Utility
2.
IPU will automatically to search the cameras connected in the LAN. The default network values of
the cameras will be displayed. By default, the network protocol of the camera is DHCP.
3.
Select a camera and click Login/Multi Login to log in the camera.
4.
Type the user ID and password. Click OK.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.
3. Up to 10 cameras can be simultaneously upgraded to the latest firmware at the same time.
If you connect the cameras to a PoE switch, please make sure the Power Consumption of
the PoE switch is sufficient.
. The following dialog box appears.
58
EDN Series Mini Indoor IP Dome
Advertisement
Table of Contents
