EverFocus EDN Series User Manual page 21

13. One Push
The One Push button can be displayed on the live view window by enabling the Show One Push
Buttons function in the Live View Layout Settings (see 7.1.4 Display and Overlay). For the
button to work, select Indoor from the White Balance Mode drop-down list. See
Camera Settings > Image > White Balance Settings (7.2.4 Image). Once this is done, clicking the White
Balance button on the Live View Window will instruct the camera to adjust the white balance settings,
and these settings will be active until the button is pushed again. This is like a "semi-automatic" way
to adjust white balance to suit the user, if the Auto or Manual mode does not give the result the user
wants.
14. Manual Control
Click the
configured an event (in the Event List) that will trigger a reaction (like a recording) when a Manual
Trigger event occurs, clicking this button will trigger that reaction. You can select what that reaction
will be. You can, for instance, set the camera to record the audio/video feed to the SD card on board
the camera. You can then click on the Playback button to open the Playback page and search for and
play all such recordings that had been stored on the card. Such event actions will be effective once
they have been configured in the Event List (see 7.3.2 Event).
Click the
15. Status Display (info line that can be placed above video box or at bottom of page)
This shows the name of the camera that is currently active or being configured, current date/time
and current frame rate. You can activate these info displays in the Overlay Text Settings (see 7.1.4
Display and Overlay).
16. Event signal icons (above video screen)
When an alarm or motion event is triggered, a signal icon will appear at the top right of the Live View
window to alert the user.
Alarm event icon
Motion detection icons
colors of the motion trigger areas you have configured in the Motion Settings (see 7.3.2 Event).
Recording icon
button to trigger an event directly from the Live View window. If you have
button to reset the alarm output remotely.
: When an alarm is triggered, this icon appears.
: When the camera is recording to a PC-based folder, this icon appears.
: The colors of these motion event icons correspond to the
15
EDN Series Mini Indoor IP Dome