EverFocus EDN Series User Manual page 12

5. Connect the network, power and audio cables to the camera.
6. Optionally insert a micro SD / SDHC card to the card slot. See No.2 in 2. Physical Description.
7. Access the camera live view. See 5.1 Assigning an IP Address. Or using the supplied Test-Out cable
to connect a monitor to the Test-Out connector (see No.4 in 2. Physical Description) of the camera
for adjusting camera angles. You need to loosen the screw before adjusting the angles.
Note: Do Not adjust camera focus yourself as it has already been adjusted (with the dome
cover on) in the factory. It is normal to see the blurry image on the live view when the camera is
connected to a monitor without the dome cover on. The live view image will be focused once
the dome cover has been put back to the camera.
Rotational Adjustment: Loosen the screw and rotate the lens by ± 90°.
Screw
Tilt Adjustment: Loosen the screw and tilt the lens by 90°.
Screw
8. Secure the cover back to the camera.
± 90°
90°
6
EDN Series Mini Indoor IP Dome