Table of Contents
Advertisement
2.
Unscrew the two screws to remove the cover.
3.
Attach and then screw the camera to the wall / ceiling using the supplied two Long Screws.
4.
Thread the cables.
a. From the side cut of the camera case: remove the plug from the camera case first.
Remove the Plug
b. Through the wall / ceiling: run the cables through the hole on the wall / ceiling.
Tip: Before tightly screwing the camera to the
wall / ceiling, you can pan the camera base by
±25° to the desired angle.
±25°
5
EDN Series Mini Indoor IP Dome
Advertisement
Table of Contents
