Advertisement
Available languages
Available languages
HeatSeal Sprint H925 - Error Indicators
®
Do not take machine apart - no user servicable parts.
(Alert LED)
Start
Stop
3 mil / 75 mic
5 mil / 125 mic
(Alert LED)
Start
Stop
Jam
3 mil / 75 mic
5 mil / 125 mic
(Alert LED)
Start
Stop
Jam
3 mil / 75 mic
5 mil / 125 mic
* For additional information to optimize performance see page 15.
10
TM
FEED JAM ERROR
Remove document(s) and any debris
from feed tray. Fan documents and
adjust size guides. Turn main power
button, located on the back of
machine, off and on again.
Press "Start" to resume*.
JAM ERROR
A) Open covers
B) Locate film jam
C) Press heat button
Use feed switch (forward/reverse)
to clear jam. It may be necessary
to cut and remove film. (Take care
not to damage rollers when
cutting film).
If cutting is required, use feed
switch (forward / reverse) to
re-feed film through machine.
HeatSeal Sprint H925 - Loading and
®
TM
Lamination Direction
11.5" (292 mm)
0.25"(6.35 mm)
Menu Size / A3
11" x 17"
(279 mm x 432 mm)
17"
(432 mm)
11"
(279 mm)
Letter=0.25"
A4=4 mm
Letter Size / A4
11" x 8.5"
(279 mm x 216 mm)
8.5"
(216 mm)
11"
(279 mm)
1.5" (3.8 cm)
Legal Size
8.5" x 14"
(216 mm x 356 mm)
14"
(356 mm)
8.5"
(216 mm)
Document Orientation
If possible, always load documents
in landscape format. Top and
bottom film border is always
0.25"/ 6mm, and side film borders
will vary depending on document
size.
For recommended max document
length, see specifications, pg. 14.
For best lamination results, avoid
irregular shapes as shown below.
11
Advertisement
