2
OPERATION
t A warning beep will be emitted 10 seconds before the
communication timer reaches the limit. When the limit
has been reached, the communication will be discon-
nected automatically.
y To manually end the communication, push [Clear]. (or
push [✱], then push [#]).
D D Making a call with a Memory Individual Code
Push [
]/[
] to select a memory individual code to make
the call.
q Display an individual code by push [
w Select the desired individual code using [
e Push [PTT] to start calling with the selected individual
code.
r While 'Calling' is displayed, the intermittent beep sound
for calling will be heard.
t With 'Connected' displayed,
to start the communication. At the same time, the count-
down timer will appear to limit the communication time.
y A warning sound will be emitted 10 seconds before the
7
TIME 1 59
CLEAR DOWN
]/[
].
]/[
PERSONAL 1
will appear allowing you
communication timer reaches the limit. When the limit
has been reached, the communication will be discon-
nected automatically.
u To manually end the communication, press the [Clear]
key. (or push [✱], then push [#]).
D D Calling the Dispatcher
The despatcher may be called directly.
q Press the [Dispatcher] key.
w Press the [PTT] key. The call to the dispatcher will be
started.
NOTE: If calling direct to the Despatcher is prohibited, the
status message 00 (or 0) (Call Back Request) is
].
transmitted and then the the transceiver will return to
the waiting mode.
e While 'Calling' is displayed, the intermittent beep sound
will be heard.
r With 'Connected' is displayed,
you to start the communication. At the same time, the
countdown timer will appear to limit the communication
time.
DESPATCHER
will appear allowing