Receiving; Ireceiving A Call; D Reception Of An Individual Call; D Reception Of A Group Call - Icom IC-F610 Instruction Manual

3

RECEIVING

' ' Receiving a call
D D Reception of an individual call
When an individual call is received, the telephone beep
sounds telling you that a call has been received.
Immediately after this, you can talk with the caller.
q The caller's individual code and count-down timer will
appear on the LCD screen.
➥If the call is from a telephone (PSTN call) or PABX
(PABX call) will be displayed.
ALERTING
TELEPHONE
w Pushing [PTT] will allow you to talk with the caller. The
transmission indicator
e During the communication, the timer will count the com-
munication time. When the limit has been reached, the
communication will be automatically shut down (clear
down).
13
*Message and
ALERTING
individual code
displayed alter-
nately.
302
TIME 4 56
ALERTING
PABX
will appear on the LCD.
r To end the communication manually, push [Clear] or
push [✱] then [#].
t The transceiver will return to the waiting mode.
• If you do not answer the call;
y If you did not answer the call by not push [PTT], the
caller's number is stored in the Call Back memory. Up
to 15 non-answered calls are stored. If there is any non-
answered call remaining in the memory, the Call Back
icon blinks.
u Select the Call Back memory by pushing [Call Back] and
[ ]/[ ], then push [PTT]. This will allow you to call the
stored unanswered call.
Q1
D D Reception of a Group Call;
You can receive a group call with a pre-programmed group
code number or the group code that has been selected via
[ ]/[ ].
When a group call is received, the beep sound is emitted
and you immediately are able to communicate.
q The LCD screen displays the caller's individual code.
GROUP 200
302