Operation; Iturning Power On - Icom IC-F610 Instruction Manual

2

OPERATION

I Turning power ON
q Push
to turn the power ON.
• A power-up alert tone sounds for about 1 sec. and an
opening message may appear.
w If the transceiver is programmed for a start up passcode,
input the digit codes as directed by your dealer.
• The keys in the table below can be used for password
input.
• The transceiver detects numbers in the same block as
identical. Therefore "01234" and "56789" are the same.
e When the "PASSWORD" indication does not clear after
inputting digit codes, the input code number may be incor-
rect. Turn the power off and start over in this case.
KEY [P
0
NUMBER 0
5
5
] [P ] [P ] [P ]
1 2 3
1 2 3
6 7 8
[P ]
4
4
9