Imounting The Transceiver; D Inverting The Front Panel - Icom IC-F610 Instruction Manual

Uhf trunked radio

Hide thumbs Also See for IC-F610:

Table of Contents

CONNECTION AND MAINTENANCE

I Mounting the transceiver

The front panel can be inverted for correct viewing while leav-

ing the built-in speaker facing away from the mounting sur-

face.

q Unscrew the 2-side screws.

w Detach the Front panel forward from the transceiver.

e Bend the ﬂat cable between Front panel and main unit as

shown in the following diagram.

Flat cable orientation

to MAIN unit

normal bend line

inverted

bend line

to Front panel

r Invert the transceiver 180 degrees clockwise as below.

t Re-attach the Front panel to the transceiver.

y Tighten the 2 screws.

CAUTION:

• NEVER rotate the transceiver more than 180 degrees.

• DO NOT bend the ﬂat cable too hard. The cable may dam-

aged.

NOTE: Be sure to bend the ﬂat cable in the

correct direction, before turning

over (inverting) the transceiver.

Table of Contents