9
INSTALLATION AND CONNECTIONS
n Opening the transceiver's
case
Follow the case and cover opening procedures
shown here when you want to install an optional unit
or adjust an internal unit, etc.
CAUTION:
DISCONNECT the DC power cable
from the IC-718 before performing any work on the
transceiver. Otherwise, there is danger of electric
shock and/or equipment damage.
q R e m o v e t h e 5 s c r e w s f r o m t h e t o p o f t h e
transceiver and 4 screws from the sides, then lift
up the top cover.
w Remove the 5 screws from the bottom of the
transceiver, then remove the bottom cover.
n Optional bracket and carrying handle
D Mounting bracket
An optional IC-MB5
available to install the radio under a table, on a wall,
in a vehicle, etc.
Select an area to mount the receiver keeping in mind
that the weight of the transceiver is approx. 3.80kg.
D Carrying handle
An optional handle allows you to easily carry and
transport the transceiver.
Attach the MB-23
supplied rubber feet as shown.
48
MOBILE MOUNTING BRACKET
with the
CARRYING HANDLE
is