Briggs & Stratton 276535 Repair Manual page 22

6. Remove the decal on the side of the carburetor
and unscrew the pilot jet
Fig. 42
NOTE:
The threads have Loctite™ on them.
7. Remove the fuel filter screen from the fuel nozzle
(Figure 43).
Fig. 43
Page 16
(Figure 42).
Fig. 44
Fig. 45
8. Remove the float hinge pin
needle assembly (with its clip)
(Figure 44). Discard the needle and clip.
9. Inspect the float for cracks or deterioration of the
cork. Replace if necessary.
10. Remove the brass inlet seat
(Figure 45).
2-Cycle Snow Engine
Section 4 - Engine Overhaul
, the inlet valve
, and the float
and discard