Remote Control Programming - Viper 7900 Installation Manual

remote control programming

The remote control has programmable features that can be changed to fit the users preferences. Programming
can be performed using the programming and function buttons 6 thru 10 to select the feature menus and
change feature settings.
Function button operations during programming:
• Press the
• Press the
• Press the
�������
�������
Enter programming:
�������
Press and hold for 3 seconds the programming button on the rear of the remote control. The programming
main menu will appear. Use the function buttons as described above to navigate and change the features.
Exit Programming:
Press the button anytime to save the settings and exit programming, or, if more than 10 seconds
�������
lapses between button presses, the remote control will automatically save the settings and exit program-
ming mode.
Sleep mode:
The remote control can be put into sleep mode to save battery power when it will not be used for long
periods of time. It will not respond to any RF signals or function button presses when asleep.
1. Enter programming mode
2. Scroll to highlight the OFF icon
3. Press the
4. Press the
main menu.
5. Press the
�������
Wake Up the remote control:
To wake up the remote control press and hold the program button about 3 seconds or until a beep is heard.
The display will play the brand introduction and enter normal operation mode.
4
or button to scroll and highlight menu and feature items.
button to choose the highlighted item
button to exit programming anytime
button to choose and access the POWER screen, CONFIRM is highlighted.
button to enter sleep mode or highlight exit and press the
button anytime to exit programming.
© 2006 Directed Electronics—all rights reserved
button to return to the