Getting Started; Installing The Sim Card, Battery, And Memory Card - Nokia 9300 User Manual

1.

Getting started

The Nokia 9300 smartphone offers you various business applications, such as e-mail, office tools, and Web browsing, and
flexible and fast network connections with EGPRS (EDGE).

Installing the SIM card, battery, and memory card

Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your
SIM card vendor. This may be the service provider, network operator, or other vendor.
Use only compatible MultiMediaCards (MMC) with this device. Other memory cards, such as Secure Digital (SD) cards, do not fit
in the MMC card slot and are not compatible with this device. Using an incompatible memory card may damage the memory
card as well as the device, and data stored on the incompatible card may be corrupted.
1. Always switch the device off and disconnect the charger before removing the battery.
With the back of the device facing you, press the back cover release button (1), and slide the cover in the direction of the
arrows.
2. Insert the SIM card into the SIM card slot (1).
Make sure that the beveled corner of the SIM card is pointing down and the contact area on the card is facing downwards.
Always remove the battery before inserting or removing a SIM card.
Note: Before you use an existing compatible memory card with your Nokia 9300, you must convert the memory
3.
card with Data mover and reinstall the applications that you previously installed to the memory card. However,
do not reinstall any pre-installed applications for the Nokia 9210 Communicator. Your Nokia 9300 contains a
later version of these applications, and these later versions must be used with Nokia 9300.
If you have a memory card, slide the memory card into the memory card slot (2).
Make sure that the beveled corner of the memory card is pointing towards the SIM card slot and the contact area is facing
downwards. Note that the back cover must be in place for the device to recognize the memory card.
Note: Do not remove the MMC card in the middle of an operation when the card is being accessed. Removing
4.
the card in the middle of an operation may damage the memory card as well as the device, and data stored on
the card may be corrupted.
If you have a memory card, you can remove a memory card after you have removed the back cover even when the battery
is inserted.
5. Insert the battery. Align the contacts of the battery with the corresponding connectors on the battery compartment.
Copyright © 2004 Nokia. All Rights Reserved. 8