About The Display; About The Menu Key - Nokia 9300 User Manual

G e t t i n g s t a r t e d
8 — Joystick. Move the joystick to the left, right, up or down to scroll through different lists. Press the center of the joystick to
select or to perform the function of an underlined command button. To change the acceleration or the speed at which the
cursor moves, select Desk
9 — Sync key. Establish a connection, and press Chr+
Tip: You can use the arrow keys or the joystick to move on the menus and the display, for example in the Web
application. The left arrow key is on the Bluetooth key (4), the up and down arrow keys on the zoom keys (5), and
the right arrow key on the infrared key (6).
Tip: Press Esc to cancel selections and close dialogs.
Tip: Press the backspace key to delete items such as calendar entries and messages.
The communicator display turns on when you open the cover. The application that was active the last time the device was
used is shown on the display. When you close the cover, the communicator display turns off.
1 — Menu. Press the Menu key to open the menu. You can use the joystick or the arrow keys to move in the menu, and press
the enter key to select a menu option.
2 — Folder. You can group applications, shortcuts, and notes to different folders.
3 — Scroll bar. For example, if you have a long file in Documents, the scroll bar helps you estimate where you are in the file,
and how much of the file you can see. The longer the scroll bar, the more you can see of the file.
4 — Command buttons. The commands on the right side of the display correspond to the command buttons. Note that when
a command is dimmed, it cannot be used.
5 — Application. To open an application from Desk, select the application, and press
6 — Indicator area. The indicator area shows application and system-related information.
1 — Dialog pages. You can move from one page to another by pressing the menu key.
2 — Selection list. You can view different options in a selection list, and select one of them.
3 — Command buttons. You can use the command buttons to perform functions on a dialog page, or in a selection list.
If there is more than one frame on the display, the selected frame is always highlighted. You can move between the frames
by pressing the tab key.
Switching between open applications
To switch between open applications, press Menu, select
application list.
Tip: Press Chr+the tab key to switch between open applications. Press Chr+the tab key again to move in the list.

About the display

A small number of missing, discolored, or bright dots may appear on the screen. This is a characteristic of this type of display.
Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.

About the Menu key

The communicator keyboard has a Menu key. Press the Menu key to access the various menu options. The options available
depend on the application you are in. The chosen option affects the item that is currently selected or open. In multipage
dialogs you can use the Menu key to move from one page to another.
Copyright © 2004 Nokia. All Rights Reserved.
→ →
Tools Control panel
→ → →
General Display
to synchronize your device with a compatible PC.
Desk main view
Multipage dialog
, and select the application. You can also close applications in the
12
Cursor settings.
See Creating new groups on page 21.
Open or the enter key.