Configuring Internet Connection Settings; Selecting An Internet Access Point - Nokia 9300 User Manual

C o n t r o l p a n e l
• Use PPP compression — Select
problems establishing a connection, select No.

Configuring Internet connection settings

These settings affect all Internet connections.
To configure common Internet connection settings, select
time period after which the connection ends automatically and returns to standby mode if not used. You can specify a
different time for each connection type, but the setting affects all Internet access points using that connection type.
Some Internet connections may appear inactive, but they may still be sending and receiving data in the background. These
connections may postpone the closing of the connection.
Select the Other page, and define the settings.
• Ask before connecting — If you select Yes, a dialog appears every time you connect to the Internet, asking you to confirm
the connection or to change the Internet access point.
• GPRS operating mode — Select
transfer on quickly when needed. If you select
application or action that needs it. Note that if there is no GPRS coverage and you selected
periodically try to establish a GPRS connection.
To change the priority of Internet access points, select
point, and press Move up
order you have specified.

Selecting an Internet access point

When you establish an Internet connection, you are asked to select the Internet access point you want to use for that
connection. In the Network connection
connecting, you can filter the list of access points according to the network type. To view all Internet access points, select
networks. To view Internet access points that are currently available, press
Offline profile, no GPRS or GSM Internet access points are shown in the list.
Tip: The Network connection
general Internet access point settings. To check the status of the setting, select
→
Connections
Copyright © 2004 Nokia. All Rights Reserved.
Yes to speed up the data transfer, if it is supported by the remote PPP server. If you have
Always on to keep the GPRS connection in alert mode and to switch the packet data
On when
or Move down. When you establish a data connection, the access points are searched for in the
dialog, select an Internet access point from the list, and press Connect. Before
dialog opens only if you have selected
→
Internet setup Other page.
→
Connections Internet
needed, the device uses a GPRS connection only when you start an
→
Connections Internet setup. Press Priority, select an Internet access
Show
Yes
66
setup. Select the Idle page, and define the
Always on, the device will
available. For example, if you are using the
in the Ask before connecting
→ →
Desk Tools
All
field in the
Control panel, and