[0/u/\|
Start-up phase. The boiler starts up after activation of the main power supply or
completion of a system reset.
[0/y/\|
The flow temperature is higher than set.
Fault (subcode [2/0/7|). The system pressure is too low (less than 3 psi (0.2 bar)).
[2/e/\|
[8/8/8|
Display test during start-up phase (max. 1 second).
The system pressure is too low (less than 12 psi (0.8 bar)).
[h/\/7|
[h/\/7|
The system pressure is too low (less than 12 psi (0.8 bar)).
[p/?/?|
The system pressure is too high (higher than 58 psi (4.0 bar)).
[\/r/e|
The boiler is resetting.
Table 8
Display codes (continued)
http://www.buderus.net
Operating and error messages
Display codes
33