Buderus GB162 User Instructions page 30

Settings menu
[c/\/1| DHW mode status setting. Adjust as follows, or press
e
DHW mode can be switched OFF or ON. This setting has priority over other DHW
mode settings, such as those made on the room thermostat.
Set the DHW mode with the
NOTE: Setting [c/\/0| also switches OFF the hot water cylinder frost protection.
After 5 seconds or after a power interruption the settings menu ends automatically. To
end manually press the
confirmed.
Table 7 Settings (continued)
http://www.buderus.net
c d
buttons. [c/\/1| means "ON", [c/\/0| means "OFF".
or
e
button. Any adjustments that you have made have been
Operating and error messages
e
:
30