Buderus GB162 User Instructions page 27

Manual Operation menu
[-/h/\} Display code: Operating phase: Also see section 6.4. The boiler is in manual
e
operation mode. During manual operation the "Settings" menu (table 7 from step 2) can
be used to temporarily change the target boiler performance.
Notice: If the boiler output has been changed temporarily, this must be set again after
ending manual operation, according to the "Settings" menu (table 7).
e
[\/2/4}Shows currently measured space heating water temperature in °F.
After a power interruption manual operation ends automatically.
To end manually press and hold the
disappears.
Table 6 Manual operation (continued)
http://www.buderus.net
Operating and error messages
d
button for more than 2 seconds until the dot
27