IBM iLC300 User Manual page 34

v About: The default effect. It displays the About menu.
Network: The projector has an RJ45 Ethernet connector that supports network
connections and TCP/IP protocols. This will allow for the control and management
of the projector over a corporate network. The following fields are accessible when
DHCP is not checked and available for manual entry of data.
v IP Address: Identifies the projector on the network.
v Subnet mask: Separates the network address part of the IP address.
v Default gateway: The IP address of the local router.
v DHCP: Select this to automatically obtain an IP address, subnet mask, and
v Network Info: Provides information on the network configuration.
The Network Info menu is informational and cannot be edited. It displays the
current IP address, subnet mask, default gateway, and the projector's MAC
address.
Language: Allows you to select a language for the onscreen display of menus and
messages.
Service: To use these features, highlight them and press Select.
v Factory Reset: Restores all settings (except Lamp Hours and Network settings)
v Lamp Reset: Resets the lamp hours counter in the About menu to zero. Do this
v Service Code: Only used by authorized service personnel.
24
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User's Guide
to pan the image, displaying different parts of it (only if the image is magnified).
To return to the original size and cancel Zoom, press the Effect button a second
time.
default gateway.
to their default after displaying a confirmation dialog box.
only after changing the lamp. It displays a confirmation dialog box.