Installing Adapters - IBM 8123 User Manual

Installing adapters

This section provides information and instructions for installing and removing
adapters. Your computer has two expansion connectors for PCI adapters, one for a
PCI Express (x1) adapter, and one for a PCI Express (x16) adapter.
To install an adapter:
1. Remove the cover. See "Removing the cover" on page 10.
2. Push the adapter latch and remove the slot cover for the appropriate PCI
3. Remove the adapter from its static-protective package.
4. Install the adapter into the appropriate connector on the system board.
5. Close the adapter latch and snap it into the closed position.
14
User Guide
connector.