Product Overview; Operation; Controls - Exmark Metro 26 Operator's Manual

Operation

Product Overview

Figure 3
1. Spark plug
2. Oil fill/dipstick
3. Grass bag
4. Speed control lever
5. Blade control lever
6. Blade control bail
7. Handle
8. Drive bail
9. Throttle/Choke control
10. Fuel tank
11. Oil filter
12. Air filter
13. Cutting height lever
Operation
Note: Determine the left and right sides of the
machine from the normal operating position.

Controls

Blade Control Bail
Located on the upper handle as shown in Figure 4.
When the blade control bail is depressed, the system
senses that the operator is in the normal operator's
position.
When the blade control bail is released, the system
senses that the operator has moved from the normal
operating position and will stop the blade.
1. Speed control lever
2. Blade control lever
3. Blade control bail
Self-Propel Drive Bail
Located on the upper handle as shown in Figure 4.
When the self-propel drive bail is squeezed, the unit
will move forward at the speed set on the speed
control lever. When this bail is released the unit will
stop moving.
Throttle-Choke Control
The throttle-choke control is located on the left side
of the handles as shown in Figure 4.
The lever is used to control engine speed. Moving
the lever to the full forward (Choke) position will
place the lever in the choke position. The choke aids
in starting a cold engine. Moving the throttle control
12
Figure 4
4. Handle
5. Drive Bail
6. Throttle-Choke Control