Set Home Waypoint; Go Home - Lowrance iFINDER H2O C Operation Instructions Manual

7. To clear the search and return to the last page displayed, press
repeatedly. Before you completely exited out of the Search menus, you
could have gone looking for another place.
NOTE:
Search works from mapping and POI data loaded in the unit. If you
have not loaded a high-detailed custom map covering the desired
search area, you may not find much.

Set Home Waypoint

A waypoint is an electronic address, based on the latitude and longi-
tude of a position on the earth. Easy Mode allows you to save two way-
points (Home and Man Overboard).
To save a Home Waypoint:
1. Press and release
2. A message appears asking if you want to save as home waypoint.
Select and press
Y
ES
named Home.
Save Home Waypoint menu (left). Home waypoint with X symbol and
name (right). When selected by the cursor, the pop-up box appears.
The example shows the home waypoint set at the cursor location. If the
cursor was not active, the point would be placed at the current position.
Caution:
Saving a new Home waypoint will overwrite and erase the pre-
vious Home waypoint.

Go Home

This command will automatically take you back to the Home waypoint
you created.
1. Make sure you have cleared the cursor, then press
follow navigation arrows on the Map Page or the compass rose on the
Navigation Page.
.
ENT
. The waypoint appears on the map as an X,
ENT
32
EXIT
Pop-up box
| and
FIND ENT