Dirt Container & Filter: Removal & Replacement - Dirt Devil Vacuum Cleaner Owner's Manual

DIRT CONTAINER & FILTER: REMOVAL & REPLACEMENT
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE REMOVING OR REPLACING FILTER.
NOTE: For best performance, replace HEPA filter every 6 months.
Please use reminder label located on filter cap to record replacement date.
FILTER TYPE
For F22 filter replacement, please visit our website at www.dirtdevil.com to buy
F22
online or call customer service at 1-800-321-1134.
EMPTY AND CLEAN DIRT CONTAINER
1. 2.
Depress button on top Hold dirt container over garbage can and press clean
of dirt container lid to release dirt container button to empty. Make sure
remove dirt container. container bottom center opening is clear of debris. Snap
dirt container bottom back into place after emptying.
REMOVE HEPA FILTER
4. 4a.
Twist the HEPA filter counter clockwise to remove from
lid (Diagram 4). Tap the filter on the inside of a garbage
can to remove excess dust and dirt from filter
(Diagram 4a).
REMOVE PRE-MOTOR FILTER
7. 8.
Hold filter frame under Remove pre-motor filter by lifting out of
running water to wash. dirt container base. Hold pre-motor filter
Allow filter frame to dry under running water to wash. Allow filter
for at least 24 hours. to dry for at least 24 hours.
2a.
3.
Remove lid by grasping
handle on dirt container lid
and turn counter clockwise.
REMOVE FILTER FRAME
5. 6.
Grasp top of filter frame Remove filter frame from
assembly and lift out of dirt dirt tube and tap on the
container. inside of a garbage can
to remove excess dust
and dirt.
REPLACE PRE-MOTOR FILTER
9.
Return pre-motor filter to cleaner.
8