Chapter 4: Using The Phone Adapter's Interactive Voice Response Menu; Overview; Accessing The Interactive Voice Response Menu; Using The Interactive Voice Response Menu - Linksys VONAGE PAP2 Ver. 2 Installation And Troubleshooting Manual

Chapter 4: Using the Phone Adapter's Interactive Voice
Response Menu

Overview

Chapter 4 explains how you can use the Interactive Voice Response Menu to configure the Phone Adapter's
network settings. You may need to change these settings depending on the specifics of your local network
setup. Use the phone's keypad to enter your commands and select choices, and the Phone Adapter will respond
with voice responses.

Accessing the Interactive Voice Response Menu

1. Use a telephone connected to the PHONE 1 or PHONE 2 port of the Phone Adapter.
2. Press **** (in other words, press the star key four times).
3. You will hear, "Configuration menu. Please enter option followed by the # (pound) key or hang up to exit."
Refer to the following table that lists actions, commands, menu choices, and descriptions. After you select
an option, press the # (pound) key. To exit the menu, hang up the telephone.

Using the Interactive Voice Response Menu

While entering a value, such as an IP address, you may exit without entering any changes. Press the * (star) key
twice within half a second. Otherwise, the * will be treated as a decimal point or dot.

Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu

Overview
Phone Adapter with 2 Ports for Voice-over-IP
NOTE: If you need to change
the settings for your Vonage
Internet phone service, then
visit www.vonage.com to
access your online account.
9