and company names herein may be the trademarks of their owners. This document is provided "as-is" by Go2Call.com, Inc. for the user's internal and non-commercial use. Go2Call.com, Inc. does not promise that the information herein is accurate or
complete and all use of such information is solely at the user's risk. All warranties disclaimed.
Proconnect ii series layer 2 management 4-port gigabit ethernet switch (70 pages)
Summary of Contents for Linksys PAP2
Page 1
PAP2 to aid you. Plug your analog telephone cord into the port labeled “Phone 1.” Plug your Ethernet cable into the “Ethernet Port” of your PAP2 to connect it to your router or Internet connection. Connect your power cord into the PAP2.
Page 2
You have now completed the static IP configuration. To verify that the configuration is correct, please pick up the telephone receiver on the phone connected to the Linksys PAP2 and dial **** to enter the configuration menu. Dial 0# to hear the IP address of the adaptor.
Page 3
Prepare your device to work with the Go2Call network Open your configuration page. To do so, type the following into your web browser: http://aaa.bbb.ccc.ddd/admin/advanced where “aaa.bbb.ccc.ddd” represents the IP address of your PAP2. On the configuration page click on “Admin Login” and then “switch to advanced view”...
Page 5
Linksys PAP2 Manual Configuration OPTION : Outbound Dialtone (No IVR) Configuration SIP Port: 5065 Proxy: sip02.go2call.com Outbound Proxy: sipnt.go2call.com:5070 Register: Make Calls without Reg: Use Outbound Proxy: Use Outbound Proxy in Dialog: Display Name: Type Your Name User ID: Type in Go2Call PIN...
Page 6
Linksys PAP2 Manual Configuration OPTION 3: Outbound IVR Configuration, requiring user to enter only destination # SIP Port: 5065 Proxy: voip02.go2call.com Outbound Proxy: sipnt.go2call.com:5070 Register: Make Calls without Reg: Use Outbound Proxy: Use Outbound Proxy In Dialog: Display Name: Type Your Name...