Internet phone adapter with 2 ports for voice-over-ip (4 pages)
Summary of Contents for Linksys PAP2
Page 1
All manuals and user guides at all-guides.com Page i...
Page 2
VoiceDirector Device Configuration Guide Linksys PAP2 Disclaimer The content of this manual is subject to change without notice and should not be construed as a commitment by the manufacturer, distributor, or service provider.
For example, if your IP address is 192.168.1.100 you would enter http://192.168.1.100 in the Address bar. 3. Press the Enter key on your keyboard, or click the Go button. The status screen displays. You are now logged into the PAP2’s Web Configuration Interface. Page 1...
VoiceDirector Device Configuration Guide Linksys PAP2 PAP2 Web Configuration Screen STEP 4 – CONFIGURING THE PAP2 FOR OUTBOUND CALLING 1. Click on the Admin Login link in the upper right corner of the page, and then click the switch to advanced view link.
All manuals and user guides at all-guides.com VoiceDirector Device Configuration Guide Linksys PAP2 System Tab 3. If you set DHCP to no, enter the Static IP, NetMask, and Gateway information. If you set DHCP to yes, continue to step 5.
Page 7
All manuals and user guides at all-guides.com VoiceDirector Device Configuration Guide Linksys PAP2 Field Value Use Outbound Proxy Use OB Proxy In Dialog Make Call Without Reg Ans Call Without Reg DNS SRV Auto Prefix 3. In the Subscriber Information section (as shown in the Line 1/2 Page screen on the following page), enter a Display Name.
Page 8
All manuals and user guides at all-guides.com VoiceDirector Device Configuration Guide Linksys PAP2 Line1/2 Page Page 5...
Page 9
All manuals and user guides at all-guides.com VoiceDirector Device Configuration Guide Linksys PAP2 6. Scroll to the Audio Configuration section (as shown in the Line 1/2 Page screen on the previous page), and change the following settings: Field Value Preferred Codec Select VoiceDirector’s...