Chapter 9
Clearing Outer Jams
When the control panel message window displays OUTER JAM,
media has jammed leaving the paper exit unit. To clear this jam,
use the following procedure:
1.
Open the back cover by pressing the top-right corner to release
the spring latch (fig. 9.9).
2.
Open the transfer unit by grasping the green handle in the
center and pulling it toward you and down (fig. 9.9).
Fig. 9.9 Open the Transfer Unit
WARNING!
area until the fuser unit cools.
ACHTUNG!
darauf, daß sie diese einige Zeit abkühlen lassen, bevor Sie
einen Papierstau beseitigen.
9 - 1 4
The fuser unit is hot! Do not remove a jam in this
Die Fixiereinheit wird sehr heiß! Bitte achten Sie
T r o u b l e s h o o t i n g