Table of Contents
Advertisement
MISFEED
JAM
OUTER
JAM
PRINTING
STATUS
PRINTING
TEST
PUT xxxxxx
PAPER IN
xxxxx INPUT
BIN
REPLACE
BELT
SIDE PANEL
OPEN
TOP COVER
OPEN
x TONER
EMPTY
T r o u b l e s h o o t i n g
Media has jammed leaving the media cassette. Remove
the jam (see the "Misfeed Jam" section later in this
chapter for details).
Media has jammed leaving the paper exit unit. Remove
the jam (see the "Outer Jam" section later in this
chapter for details).
A status page has been requested via the Print Status
option in the Administration/Special Pages menu. This
does not necessarily mean that the status page is
printing at the particular moment the message is
displayed since other jobs may be ahead of it in the job
queue.
A sample page or a registration page has been
requested. This does not necessarily mean that the page
is printing as the message is being displayed (other jobs
may be ahead of it in the job queue).
A media cassette is empty; reload the cassette. xxxxxx
PAPER is the media size the cassette is currently
configured for. xxxxx INPUT BIN is the empty
cassette. (See chapter 5, "Print Media and Daily
Operations," for information on refilling cassettes.)
The OPC belt cartridge needs to be replaced. After
installing the new cartridge, you have to clear this
message through the control panel using the Clear
Warning option. (See chapter 6, "Consumables and
Preventative Maintenance," for details on replacing the
OPC belt cartridge and "Administration/Engine" in
chapter 4 for details on clearing the warning.)
The waste toner cover is not fully closed. Close the
cover.
The top cover of the printer is either off or partially
open. Make sure it is seated properly and fully closed.
A toner cartridge is empty. The x is replaced by the
color of the toner cartridge that needs to be replaced.
(See chapter 6, "Consumables and Preventative
Maintenance," for information on replacing a toner
cartridge.)
Chapter 9
9 - 3
Advertisement
Table of Contents
