Table of Contents
Advertisement
3.
Insert the wire cleaner into the recess on the pre-charger unit,
and slide the cleaner back and forth as shown in figure 6.15.
Fig. 6.15 Clean the Pre-Charger Unit
4.
Clean the inside corners of the pre-charger unit with cotton
swabs.
5.
Making sure the pre-charger unit aligns on the runners inside
the printer, slide it back into the printer.
6.
Reinstall the waste toner pack, and close the waste toner
cover.
C o n s u m a b l e s a n d P r e v e n t a t i v e M a i n t e n a n c e
Chapter 6
6 - 3 3
Advertisement
Table of Contents
