Table of Contents
Advertisement
the holes on the post and bracket are centered and that the flange
on the bottom of the bracket goes into the slot on the post.
b. Attach the bracket to the post using one of the two small metal
screws that came with the sheet feeder (fig. 8.2).
c. Align and attach the second metal bracket to the rear left sheet
feeder post in the same way as you did the first bracket (fig. 8.2).
Fig. 8.2 Install the Metal Brackets
P r i n t e r O p t i o n s
Chapter 8
8 - 3
Advertisement
Table of Contents
