IBM NetVista N2800e Reference Manual page 50

40
Table 8. NSBxxxx error codes and text messages (continued)
Error code Error message
NSB83539 Cannot PING boot server
x %s.
NSB83549 Unable to open file.
NSB83560 Boot file name or
directory not valid.
NSB83579 Failed to boot after 1
attempt.
NSB83589 Failed to boot after %d
attempts.
NSB83590 Unrecognized boot file
server protocol.
NSB83600 Boot file server protocol
not specified.
NSB83619 Address resolution failed,
boot file server x%s.
NSB84509 Gateway address not
valid.
NSB84519 Address resolution failed,
gateway x %s.
Client IP address messages (NSB85xxx)
Duplicate IP address x
NSB85509
%s, that is owned by %s.
NSB85519 IBM Network Station IP
address not valid.
NSB86509 Subnet mask not valid.
NSB87509 Address resolution failed,
IP address x %s.
NSB87519 Address resolution failed.
IP address x %s not valid.
NSB87529 IP address %s not in ARP
cache.
NSB88500 Stopping DLL packet
replication.
What you should do
Verify your configuration settings in the NS
Boot utility, and confirm the server
configuration.
Confirm the server configuration.
Verify your configuration settings in the NS
Boot utility, and confirm the server
configuration.
Verify your configuration settings in the NS
Boot utility, and confirm the server
configuration.
Verify your configuration settings in the NS
Boot utility, and confirm the server
configuration.
Verify your configuration settings in the NS
Boot utility.
Verify your network configuration settings
in the NS Boot utility.
Verify your configuration settings in the NS
Boot utility, and confirm the server
configuration.
Gateway messages (NSB84xxx)
Verify your network configuration settings
in the NS Boot utility.
Verify your network configuration settings
in the NS Boot utility.
Verify your network configuration settings
in the NS Boot utility, and the DHCP or
BOOTP server configuration settings.
Verify your network configuration settings
in the NS Boot utility.
Subnet mask messages (NSB86xxx)
Verify your network configuration settings
in the NS Boot utility.
IP address messages (NSB87xxx)
Verify your network configuration settings
in the NS Boot utility.
Verify your network configuration settings
in the NS Boot utility.
Verify your network configuration settings
in the NS Boot utility.
Remote packet messages (NSB88xxx)
Reload the factory default settings on the
thin client, and then configure the network
settings in the NS Boot utility.