IBM NetVista N2800e Reference Manual page 49

Table 8. NSBxxxx error codes and text messages (continued)
Error code Error message
NSB71509 DHCP option %d boot
server name %s failed
DNS.
NSB71515 Missing DHCP option
%d from server.
NSB71525 Missing DHCP client IP
address.
NSB71535 Missing DHCP client
directory and file name.
NSB71545 DHCP OFFER XID
different than DHCP
DISCOVER XID.
NSB71555 DHCP options exceed the
maximum allowable
DHCP option length.
NSB71605 DHCP offer from server
%s not valid.
NSB72505 BOOTP options exceed
the maximum allowable
BOOTP option length.
Network communication messages (NSB8xxxx)
NSB80509 Destination unreachable,
return code x%d.
NSB80519 Failed ICMP mask
request.
NSB80529 Failed ICMP router
solicitation.
NSB80539 Domain Name Server
(DNS) error, return code
%d.
NSB80549 Cannot fragment data
packet, data not sent.
NSB80550 Transfer terminated by
user.
NSB81509 Time-out waiting for
TFTP reply.
NSB81519 TFTP error - %d %s.
NSB83509 Unable to load file via
boot file server protocol.
NSB83519 Cannot access boot file
from any server.
NSB83529 Cannot contact boot file
server x%s.
What you should do
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
BOOTP messages (NSB72xxx)
Verify that the BOOTP server settings are
correct.
Verify that there are no problems with the
network, and restart the thin client.
Verify that there are no problems with the
network, and restart the thin client.
Verify that there are no problems with the
network, and restart the thin client.
Verify that there are no problems with the
network, and restart the thin client.
Verify that there are no problems with the
network, and restart the thin client.
Restart the thin client.
TFTP messages (NSB81xxx)
Restart the thin client. If this does not solve
the problem, verify that you connected the
network cable to the thin client.
Boot file server messages (NSB83xxx)
Ensure that the boot protocol agrees with
your server settings in the NS Boot utility.
Verify your configuration settings in the NS
Boot utility, and confirm the server
configuration.
Verify that the boot server settings are
configured correctly.
Resolving hardware problems
39