Removing The Drive Carrier - Fujitsu ESPRIMO E4xx Operating Manual

Removing the drive carrier

Removing
► Open the casing (see
► Remove the front panel from the casing (see
► If drives are installed, disconnect their data cable and power supply cable plugs.
► Slightly lift the drive cage using the plastic handle (1).
► Slide the drive cage in the direction of the arrow (2) until the guides (a) are the
same height as the corresponding openings in the casing.
► Use the plastic handle to lift the drive cage out of the casing (3).
Fujitsu
"Opening the casing", Page
a
a
33).
"Removing the front panel", Page
a
1
2
3
System expansions
34).
a
37