Fujitsu ESPRIMO E4xx Operating Manual page 51

Releasing the hard disk drive cage from the hard disk drive
► Undo the screws (1).
► Remove the hard disk drive cage from the hard disk drive (2).
► Install the drive cage (see chapter
► Secure the front panel on the casing (see chapter
► Install the cover on the casing again (see chapter
It may be necessary to modify the entry for the drive in the BIOS Setup.
If you are not planning to install a new hard disk drive, secure the screws in the threaded
bores on the underside of the hard disk drive cage so that they are not lost.
Fujitsu
1 1
1 1
2
"Installing the drive cage", Page
"Securing the front panel", Page
"Reattaching the cover", Page
System expansions
38).
35).
36).
47