Configuring The Command-Line Interface Settings - IBM Remote Supervisor Adapter II User Manual

Ibm remote supervisor adapter user's guide
Hide thumbs Also See for Remote Supervisor Adapter II:
Table of Contents

Advertisement

Note: All traffic from COM2 is now routed to the Telnet session. All traffic from the
ESC (
Note: In the default mode (EMS compatible), press Esc then the open parenthesis
SN# J1RAE32S000> exit (Press Enter.)

Configuring the command-line interface settings

The Remote Supervisor Adapter II command-line interface provides a set of
commands that you can use for power control, monitoring and configuring the
Remote Supervisor Adapter II and the server. The command-line interface is
available from either or both serial ports and from up to two simultaneous Telnet
sessions.
The Remote Supervisor Adapter II command-line interface commands and their
descriptions are listed in Chapter 6, "Command-line interface," on page 91.
To use the command-line interface, complete the following steps:
1. Log in to the Remote Supervisor Adapter II on which you want to configure the
2. In the navigation pane, click Serial Port.
3. Scroll to the Serial Redirect Settings / CLI Settings area.
4. Use the following information to select the values for the fields.
36
Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User's Guide
Telnet session is routed to COM2.
symbol [ ( ] to return to the command-line interface.
serial port. For more information, see Chapter 2, "Opening and using the Web
interface," on page 5.
CLI mode
Use the command-line interface mode options to configure whether the
command-line interface is available from a serial port and whether a
custom key sequence must be used to enter and exit. The default
setting enables the Remote Supervisor Adapter II to function in
Microsoft Windows Server 2003-compatible environments.
Select from the following values:
v None (CLI disabled)
The Remote Supervisor Adapter II does not allow access to the
command-line interface from this serial port.
v CLI with EMS compatibility keystroke sequences
The Remote Supervisor Adapter II accepts three key sequences
when in Emergency Management Services-compatible mode. The

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Remote supervisor adapter ii slimline

Table of Contents