Configuring Remote Alert Recipients - IBM Remote Supervisor Adapter II User Manual

2. You cannot distinguish between the alerts that are sent to remote alert

Configuring remote alert recipients

Notes:
1. For the Remote Supervisor Adapter II SlimLine, the configuring remote alert
2. For the Remote Supervisor Adapter II SlimLine, the PPP settings are not
You can define up to 12 unique remote alert recipients. Each link for an alert
recipient is labeled with the recipient name, notification method, and alert status.
To configure a remote alert recipient, complete the following steps:
recipients. All configured recipients receive each alert that you select.
recipients feature is available only when using LAN-based alert functionality.
available.
1. Log in to the Remote Supervisor Adapter II for which you want to configure
remote alert settings. For more information, see Chapter 2, "Opening and using
the Web interface," on page 5.
2. In the navigation pane, click Alerts. The Remote Alert Recipients page is
displayed. You can see the notification method and alert status for each
recipient, if they are set.
3. Click one of the remote alert recipient links. An individual recipient window
similar to the one in the following illustration opens.
Chapter 3. Configuring the Remote Supervisor Adapter II
23