Users Command - IBM Remote Supervisor Adapter II User Manual

x345RSA> timeouts
-p 5
-o 2.5
-l 3.5
-f 3
-n 1

users command

Syntax
users [options]
options:
-user number
-n username
-p password
-a authority level
Description
Use the users command to access all user accounts and their authority levels, and
to create new user accounts and modify existing accounts.
Read the following guidelines about the users command:
v User numbers must be from 1 to 12, inclusive.
v User names must be less than 16 characters and can only contain numbers,
v Passwords must be more than 5 and fewer than 16 characters long and must
v The authority level can be one of the following levels:
Example
x345RSA> users
1. USERID Read/Write
Password Expires: no expiration
2. manu Read Only
Password Expires: no expiration
3. eliflippen Read Only
Password Expires: no expiration
4. <not used>
5. jacobyackenovic custom:cel|ac
Password Expires: no expiration
6. <not used>
7. <not used>
8. <not used>
9. <not used>
10. <not used>
108
Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User's Guide
letters, periods, and underscores.
contain at least one alphabetic and one nonalphabetic character.
– super (supervisor)
– ro (read only)
– Any combination of the following values, separated by |:
am (User account management access)
rca (Remote console access)
rcvma (Remote console and virtual media access)
pr (Remote server power/restart access)
cel (Ability to clear event logs)
bc (Adapter configuration [basic])
nsc (Adapter configuration [network and security])
ac (Adapter configuration [advanced])