Lap Belt Instructions - Sunrise Medical Quickie 2 range Owner's Manual

Lap belt instructions

Note:
Lap belts are fitted as positional aids, and are not suitable as transportation
restraints.
Step 1
Positioning belt kit. The Positioning
belt kit contains, one positioning
belt, three tri glide buckles and two
cable ties.
Step 2
To assemble the positioning belt.
Take the positioning belt strap and
thread through the tri-glide. Repeat
on both ends of positioning belt.
Step 3
To fit the positioning belt to the
chair. Take the positioning belt strap
and wrap around back post.
Step 4
Thread the positioning belt back
through the tri-glide to form a loop
around the back post. Thread
positioning strap through tri-glide as
shown in step 5.
2 Issue 4
Step 1
Step 2
Step 3
Step 4
38