Table of Contents
Advertisement
Chair features
Height-adjustable armrests
To install armrests, slide the outer
arm post (1) into the receiver (2).
The armrest will automatically lock
in place (Fig. 22).
To adjust the armrest height, rotate
the release lever (3) to the second
stop (Fig. 22B). Slide the armrest
pad (4) up or down to the desired
height and return the lever to the
locked position. Push the arm pad
until the upper arm post locks firmly
in place.
To detach the armrest, rotate the
release lever to the first stop and
remove the armrest (Fig. 22C). To
replace the armrest, slide the
armrest back into the receiver and
return the release lever to locked
position (Fig. 22).
The armrest can be adjusted to
remove free play in the receiver
and inner arm post (Fig. 22). To
tighten or loosen the fit of the outer
post in the receiver, first loosen the
four 10mm A/F bolts (5) two on
each side of the receiver. With the
armrest in the receiver, squeeze
the receiver to achieve the desired
fit, then tighten the four bolts. To
adjust the fit of the inner arm post,
two set screws (6) are installed in
the outer arm post (Fig 22D). Turn
the set screws in or out until the
desired fit is achieved using a
3/32" Allen key.
4
3
1
2
5
Fig. 22
Fig. 22B
Fig. 22 D
21
Fig.22C
6
2 Issue 4
Advertisement
Table of Contents
