Table of Contents
Advertisement
Chair adjustments
Flip up footrests. Fixed front
frame
To adjust the height of flip up
footrest, remove the bolt (1) as
shown, (use a 10mm A/F spanner)
move the footrest assembly to the
desired position, ensuring the hole
(2) in the outer tube (3) align with
the hole in the inner tube (4).
Replace the bolt and tighten to
5Nm torque setting (Fig. 35).
Adjusting the angle of Optima
backrests
To adjust the angle of Optima
backrests (Fig. 36) remove screw (1)
and nut (2) and adjusting washer (3).
Use a 4mm Allen key and a 10mm
A/F spanner. Loosen screw (4)
sufficiently to allow brackets (5-6) to
rotate. Turn the adjusting washer
round to the desired angle and
replace it into the recess (7) with all
the holes in line. Replace the screw
(1) and nut (2) and tighten to 8-10Nm
torque. Tighten screw (4) to 8-10Nm
torque.
2 Issue 4
2
1
Fig. 35
4
7
1
3
Fig. 36
28
3
4
5
6
2
Advertisement
Table of Contents
